|
Inspecting & Sealing Alumn. Wheels.
I have an old set of alum. wheels on one of my other cars. The wheels leak air through the castings. Not at the beads.
I have been told there is a procedure that can be done to test and later seal aluminium wheels. They suposedly do this procedure to test the integrity of alumn racing wheels and seal their castings. Since there are many Cobra owners here that race their cars I was hoping to get so information about it. Thanks as usual, Bud |
I have heard some people have had success using a bar of soap to seal the wheels.
Any truth to this? TURK |
| All times are GMT -7. The time now is 11:00 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: