- -
Engine Stand Bolts?
(
http://www.clubcobra.com/forums/all-cobra-talk/44282-engine-stand-bolts.html)
Engine Stand Bolts?
Any one know what size bolts I need to buy to bolt my 428 block to my engine stand (through the tranny holes)?
|
PatBuckley |
08-11-2003 04:38 PM |
It would depend on the engine stand you are using.
|
I would assume the diameter of the bolts are independent of the stand and dictated by the diameter of the holes in the block. I'll buy different lengths.
|
xlr8or |
08-11-2003 04:44 PM |
I believe a 3/8 bolt is what you need..
I like to use grade 8 bolts for that but don't know if it's necessary.
|
PatBuckley |
08-11-2003 04:44 PM |
Why don't you just measure them?
|
My block is being shipped currently. I would like to be ready when it arrives if possible. I may just have to wait until it gets here. I may pick up some 3/8 and try them.
|
PatBuckley |
08-11-2003 10:06 PM |
7/16 X 14
3.5" long
|
xlr8or |
08-11-2003 10:49 PM |
I wondered if they were 7/16 but for some reason that seemed to big to me.
:JEKYLHYDE
|
sllib |
08-12-2003 06:14 PM |
Joe;
PAW in LA sells engine stand bolts for the big three engines. If you don't have one of their catalogues go to their web site and order one. It's worth the money just to see what's out there. I think Summit may sell the kits also.
Bill S.
|
All times are GMT -7. The time now is 05:15 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: