|
A&C guys, what power brake boostser/master cylinder do you use?
A&C guys, what power brake boostser/master cylinder do you use?
I have 4 wheel discs. I know it will stick out a bit into the wheel well, but I'm okay with it. . . . |
A&C Owners
Hey RS,
Most of the A&C guys who I know use Wilwood dual cylinders with a balance bar. There is one guy in here, CaseyT, who I know for sure has an A&C and went with a power booster setup. Do a members search and drop him an e-mail. He's a very helpful guy. Tony |
I've had my A&C on the road for over three years. Have over 16k on it and have done some open track. I use two master cyl's and no booster. Let's face it: It's only a 2300 lb car with 11" discs. You really don't need a booster.
Roscoe |
| All times are GMT -7. The time now is 11:16 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: