Club Cobra - Jaguar suspension

Club Cobra (http://www.clubcobra.com/forums/)

- ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)

- - Jaguar suspension (http://www.clubcobra.com/forums/all-cobra-talk/47229-jaguar-suspension.html)

Jaguar suspension

Does anybody have any pics, drawings or a design/drawing for using stock Jaguar suspension front and rear?? I know the rear will have to be narrowed, but I'd like to use the stock upper and lower a-arms up front. Will just transferring the stock measurements work?? The steering rack should work I have already compared it to an old MustangII rack. There are enough threads on the tie-rod ends to narrow the front. I bought a Standard II/ 73-76 Jag XJS for this reason. I have built my own chassis, and am using a B&B body with stock 90" wheelbase. I am ready to fabricate the front and rear clip. I plan on using Aldan coil-overs for the front and the same for the rear or approximate equivalent. also i need some help/suggestions about what height to use for setting the rear end and front end. I am planning to use the car for fri-sat night cruising and the occasional wekend trip. Any comment would be appreciated,
Thanks ahead of time
Steve

__________________
Semper Fi!
Bigfoot. Mike Co. 3/5 1st MarDiv, "the Nam, 1967

Hey Steve,

You are welcome to come and see my setup. I live in Hockley about 10 minutes away. I have the jag front and rear in a Contemporary frame. No body on it yet, so measurments would be simple.

Dave

Dave,
That would be fantastic!! I have had this inquiry here for about 2 weeks and you reply telling me you are in Hockley!! That is great!!
I am 3 lights north of 290 & Huffmeister.
Please contact me. I work out of my home and will send business & home phone to you. I will e mail you my phone and perhaps you can e mail me with your particulars?
Thanks very much!
Steve