|
Upper Radiator Hose
Is there a 1 piece formed rubber upper radiator hose used on the small block CSX 7000 cars or Kirkham FIA's? Or do they use a formed piece of tubing connected with 2 short pieces of straight hose?? I am currently using parts of two hoses that are butted together to form a complete length and are joined with a 2" piece of tubing and 2 hose clamps, the tubing can't be seen but the potential for a leak is present, I would like to eliminate this if possible. Pics are in my gallery on page 2.
Rick |
| All times are GMT -7. The time now is 01:19 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: