- -
Brake Fittings
(
http://www.clubcobra.com/forums/all-cobra-talk/49207-brake-fittings.html)
| Jeff Cruise |
01-14-2004 08:23 AM |
Brake Fittings
Can't find any 3/16" 90 brake fittings. Anyone know where to get these?
|
| Mike Hausner |
01-14-2004 10:06 AM |
Hi Jeff
I had a similar problem with my front brakes. I had to swich to stainless steel braided lines at the caliper. You can get streight, 45, or 90 degree fittings. I paid about $80 for the two flex lines. Try SPEEDWAY MOTORS, they sell all kinds of street rod & racing parts.
Good luck, MH
|
| Rick Parker |
01-14-2004 11:09 AM |
Are you using AN fittings? 3/16 is a -3 size, any Earl's or similar vendor should have them available. If you are using hard lines a 90 degree fitting is available from most parts houses with an inverted flare in it with the fitting made of brass.
Rick
|
| Jeff Cruise |
01-14-2004 01:00 PM |
I am doing hard lines with brass fittings. I have called a lot of places around Indianapolis who say there isn't any demand for them and don't have them or make them anymore.
|
| rdorman |
01-14-2004 01:46 PM |
Look up aeroquip or earls, they should have them. Some place like Aircraft spruce would probably be a good choice as well.
Rick
|
| All times are GMT -7. The time now is 08:53 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
