|
Daytona pictures
1 Attachment(s)
Hello.
Most of you already saw my Cobra Daytona drawings some time ago. Now it’s time for the 3D model… Have a look and tell me what do you think… Best Regards from Portugal, Ernesto Freitas :D PIC 1 |
1 Attachment(s)
Pic 2
|
1 Attachment(s)
PIC 3
|
1 Attachment(s)
PIC 4
|
1 Attachment(s)
PIC 5
|
1 Attachment(s)
PIC 6
|
1 Attachment(s)
PIC 7
|
Ernesto, Thats beautiful, you are one talented guy!
|
1 Attachment(s)
PIC 8
|
1 Attachment(s)
Pic 9
|
1 Attachment(s)
PIC 10
|
1 Attachment(s)
PIC 11
|
1 Attachment(s)
PIC 12
OBS: MODELLING AND RENDERING JOB BY JOSE SUSTACHA. (I'm only the designer) |
Very cool!!! When will it be on the road?:D
|
Ernesto - You have done a fantastic job. Your creation looks very contemporary. I don't want to sound negative, but I would hope that if the Daytona were being made today that it wouldn't be such a combination of all of today's sport's cars. It had a look all of it's own, a style that was built for performance that happenend to be uniquely attractive and timelessly beautiful. It's hard to improve on the original, and in my opinion, impossible.
Bumpster |
Sure looks like a Daytona to me
Truely outstanding! The C-5 Corvette driveline would be a natural for that body. Show us what it would look like if you were to paint the tail half white,half blue, like on the originals .
|
One word.....SWEET!!!
|
Ernesto,
It looks pretty good to me. It's hard to see the detail in the lower black areas. I don't care much for the curved bottom of the door sill. I cannot see much of the sidepipes, only the tips. Makes me wonder how the tips can go through the framerail, like that, if the mufflers are mounted inside the framerail. I cannot see the downforce tunnels, under the car, either. That seems like a very good idea. Is there no opening for radiator air? It seems you have a large outlet but no inlet. I like the space around the tires. Too often, designers draw these things with the tires virtually against the edge of the bodywork which is unworkable in real life. Overall design is very nice. Makes me want to buy some styrofoam and start whittling out a custom car body. Paul |
I like it. Kinda looks like a 350Z got run over by a viper.:LOL:
|
Thank's guys.
Mr. bruce I will try to make what you want. RallySnake, I will post some pics from the bottom. Ernesto |
| All times are GMT -7. The time now is 10:49 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: