![]() |
Stainless Braided Hose
Is it ok to use nothing but this stuff for brakes? I know you're supposed to run hard line anywhere that flexing is not an issue...but I just love this stuff...hehehe....
|
Run hardline
|
blykins
:3DSMILE: I just love it also. I have used hard line for the brakes but used the braided lines and fittings everywhere else. My gallery photo of the engine is not that detailed but you may see it there. The only problem I have encountered is the braided line rubbing on the inside of the bonnet/hood. %/ As this is not painted at this stage it is a good indication that I need to make sure the engine lines don't touch anywhere. It would have made a real mess of the inside paintwork. Cheers Bernie |
| All times are GMT -7. The time now is 09:01 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: