Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Poor Man's Qwik Lift for $250.00 (look!) (http://www.clubcobra.com/forums/all-cobra-talk/61273-poor-mans-qwik-lift-250-00-look.html)

CHANMADD 08-13-2007 08:38 AM

You could tie the blocks together with a small beam side to side to stop it walking and then you could place it anywhere.Look on a car dealers lot that has those drive up ramps.Great Idea!!!!

mdross1 09-20-2013 05:17 AM

Had not thought about building anything like your ingenious setup Red Barchetta but after too many years using floor jacks and stands to get under our car it is time. Thank you for such detail and the great pictures.

BAsque1 09-21-2013 05:20 AM

Dean:
that is exactly what I need, on my way to Lowes to get my materials and start the winter projects with more access to my car. I will PM you later for more details as needed.
Great design!!
Lou (Basque1)

Ron61 09-21-2013 05:38 AM

Lou,

Dean did a great job on his ramps but remember, he never lets a bug get on his car either so you would expect only the best out of him.

Ron :LOL: :LOL:

Ron61 09-22-2013 02:40 AM

Since Dean has been banned for whatever reason, and some of you have sent PMs wanting to know how to contact him to follow up with him on questions about the ramps, you can do so over on our site at Talk@CobraRegistry.com.

He uses the same screen name there and is always happy to help anyone.

This is NOT an attempt to raid CC and get members over to our site. It is just an answer to several PMs and I don't come here often enough to catch them every day. However if the moderators feel I am out of line, delete the post or whatever you feel is the appropriate action.

Ron

Sawdust 09-22-2013 04:00 AM

Since when was Dean banned???

1795 09-22-2013 07:09 AM

Caution about wood
 
Just in case some of the readers are better mechanics than carpenters. When selecting wood make sure that it is clear (no knots). If you cannot find clear wood and have to use wood with knots, the knots should be round and pass straight through the board, not at an angle. Any board with a knot that runs across the board is at increased risk of splitting. Good luck.

Jim

trularin 10-06-2015 04:40 AM

Ten years and they still are looking for something like this.

Tru

RACERAL 10-06-2015 06:14 PM

I like your thinking


All times are GMT -7. The time now is 02:25 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: