Club Cobra
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   which kit would you purchase (http://www.clubcobra.com/forums/all-cobra-talk/76245-kit-would-you-purchase.html)

283e 02-06-2007 08:30 PM
Cabs cobra
 
Hi LMH,

That is one sharp cobra Cab Is working on!!

Have to say I'm envious too.

Still researching cobra kits. Doesn't look like a lot of manufactures are going to the Knotts Berry Farm shin-dig. At least not the ones I was interested in at this point. May pass that up this year and hunt some down in my area (Washington state.)

George

LMH 02-06-2007 08:37 PM
I've never been but I guess London is the biggie for manufacture displays. Do a search on it for more about where and when. Might be worth the trip.
Larry

blueovalfanatic 02-06-2007 08:56 PM
Quote:
Originally Posted by LMH
I've never been but I guess London is the biggie for manufacture displays. Do a search on it for more about where and when. Might be worth the trip.
Larry
I would have to agree. Not only do they have quite a few different manufacturers, but the ability to see so many makes parked right in the middle of the street, side by side, front to back. Then you can pay $10 for charity, and ride in one.

Greg

Karen Wells 02-07-2007 04:47 PM
Hi George,
B&B Mfg. makes a nice cobra too. You can put any engine/trans in their cobra, can make any stage you want .
The website is www.bandbroadster.com and you can call 417/472/3547 and talk to Bryan .
Karen

tman8 02-07-2007 05:37 PM
B&B all the way!

tman8 02-07-2007 05:50 PM
The frame is great Im a welder in a fab shop this will handle HP.

barabar 02-25-2007 09:54 AM
hurricane
 
We just dynoed the BB ford at 700hp and 700ft lbs. Plus 150hp NOS. Had to move motor mounts back half an inch to acommadate march belt system.
We are using a hurricane frame but modified it with gussets and two more cross members and a complete aluminium consel and dash.
AF Morrow

lamaluv 02-25-2007 10:56 AM
George you might want to go to the Western States Cobra Bash in Sparks Nevada in May to look at a bunch of different brands in one place. There is a link on this site that will give you all the info. It would be a great chance to look at as well as talk to owners about their experiance building the cars.

Good luck in your search,

Dick

cab 02-25-2007 12:01 PM
Quote:
Originally Posted by LMH
Thought I would post this photo of "cab"s Hurricane. (I hope you don't mind cab!)
I think it's awesome looking and it has IRS. (plus it's a lot farther along than mine!!:CRY: )
Good luck with whatever manufacturer you pick!
Larry

http://www.clubcobra.com/photopost/d...iith_doors.jpg
Not at all larry ,The hurricane is a vary complete kit can't waite to get it on the road shooting for mid April

Dinobyte 02-25-2007 12:27 PM
George,

If you have your motor and transmission already, I would check out Backdraft or Superformance, as they come roller ready.

Excaliber 02-25-2007 12:38 PM
A 429 with a C6 would be a nice fit in a Classic Roadster, a to often over looked great kit to build.

calxen61 07-10-2007 09:12 AM
Quote:
Originally Posted by Excaliber
A 429 with a C6 would be a nice fit in a Classic Roadster, a to often over looked great kit to build.
Is the 429 an older motor, and the c6 an auto. (Classic Roadster)? I aminterested in why you like that combonation. Someone else told me the same thing with no explnation.

I am new and looking for a kit, hey I was born in Hawaii and still have several generations of family there.

cal


All times are GMT -7. The time now is 09:42 AM.
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: