Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Soft Top Question (http://www.clubcobra.com/forums/all-cobra-talk/78299-soft-top-question.html)

Lawler 04-19-2007 06:39 AM

Soft Top Question
 
What brand of soft top did you install on your cobra? Do you like it and what problems if any have you had with it? I will be installing one on my Lonestar.

Lawler

RedEsprit 04-19-2007 07:47 PM

Need to contact the manufacturer on this one. Robbins makes original Cobra tops but they will fit very few replicas (Kirkham, ERA). Not familiar with Lonestar but tops and side curtains are tricky. Luck to ya.

jarendall 04-19-2007 07:58 PM

I have a soft top and side windows, also A/C and heat, makes the car more comfortable, however, I run with the top off, more than I do with it on, I mostly use the top in the winter, it cost over a thousand dollars, so you need to consider that also, mine came from the manufacturer, however most large cities have a company or two that will make one for you, call your local trim shops, also you can search the various Cobra manufacturers web sites

rsimoes 04-19-2007 09:15 PM

Won't fit the Kirkham without major modifications, due to higher roll bar, I gave up on the top and got s tonnel cover instead. . .

Dwight 04-20-2007 04:12 AM

Tops
 
Lone Star has a 94" wheel base and most of the other Cobras have 90". The Lone Star doors are 4" longer, therefore most other tops will not fit. You can buy the frame and have a local shop make the top. We have a couple of guy here who have made their soft tops.

Dwight

Lawler 04-20-2007 07:01 AM

Thanks RedEspirit


Quote:

Originally Posted by RedEsprit
Need to contact the manufacturer on this one. Robbins makes original Cobra tops but they will fit very few replicas (Kirkham, ERA). Not familiar with Lonestar but tops and side curtains are tricky. Luck to ya.


40niners 08-15-2007 09:13 AM

Lone Star Soft Top
 
Hi Lawler,

I know this thread is over 4 months old. I was wondering if you ever found a solution for the soft top. I'm in Houston, so I'm not too far away from you. did you find a local shop or did you have to fabricate one yourself?

Thanks,
Eric


All times are GMT -7. The time now is 07:51 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: