![]() |
need help with 17" PSE rims
my car is a SPF and the 17" rims I got are PSE. When I first ordered them I made sure Phil knew it was for SPF. The back ones have half inch space between the back of the rim and the rotor. Do yours sit this way, or is there something wrong with the rims or maybe I have the wrong hub addaptors**)
|
Cobra, Do you mean a spacer between the pin drive adapter and the wheel? Who installed the spacer? If you remove it will the wheel seat against the adapter with out hitting the brake caliper? I have seen SPFs with a .25" spacer to clear the wilwoods with Trigos at around car #780. A car # sometimes helps to know due to changes.
curtis |
I had a small spacing problem with my PSE's also. Phil was real good about helping me remedy it. Have you talked to him about it?
|
I have the PSE 17" wheels on my car. I have atleast 1/2" or more space between the back of the wheel and the calipers. I just put 335/ 35's on the rear and they sit perfect. Right at the edge of the fenders.
Scott http://www.clubcobra.com/photopost/d...dium/Tire3.jpg |
Looks good
|
Hi Scootter
I love the way your car is set up , did you do anything different with the suspension after you installed the PSE wheels or did you just lower it to the ground by useing the adjustable coil overs. Rob |
Rob,
When I bought the car it was lowered as far as it could go. After wearing out the inside of the front tires, I bought a new set and took it to a performance alignment shop. They keep it as low as possible plus changed the front and rear springs, camber, corner weights, ect, ect. Scott |
Scootter
The car must surely get everyones attention when you drive it , The color combination is great Thanks for the reply Rob |
| All times are GMT -7. The time now is 03:57 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: