Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Mirror question (http://www.clubcobra.com/forums/all-cobra-talk/79660-mirror-question.html)

tc_sj 06-10-2007 03:03 PM

Mirror question
 
I would like to add a driver and passenger mirrors to my cobra, I searched this forume and llok like finsh line carry them, do you recomnend " FLAT OR COVEX"

Thanks

Raydot Mirror Chrome $29.00
MR 300C

Click to enlarge
Raydot Mirror, Chrome, GT300 .-

Chrome Raydot (Mirror finish) Dia. 3-1/2”. OEM on Shelby R model and SC Cobra. Available in flat or convex. Each. SRP:$45.00/Special:$29.00

strictlypersonl 06-10-2007 03:16 PM

Driver's side: Flat
Passenger's side: Convex

tc_sj 06-10-2007 03:22 PM

Can you explain the reason why both side are not the same?
Thanks
TC

strictlypersonl 06-10-2007 04:38 PM

Assuming that you're mounting both the mirrors just in front of the windshield posts, you're much closer to the driver's side mirror than the "shotgun". You see a wider-angle view on the closer mirror. The passenger's side view is very narrow and not very useful. Take a look on almost any production car and that's the way the mirrors are configured.

Rick Yeager 06-10-2007 07:52 PM

Like tc sj, I have tried to do a meaningful search regarding side mount mirrors too. Only my concern was where should they be placed? Would anyone care to comment on that. About how far in front of the window should they go and where laterally on the fender?

By the way, Strictlypersonl, thank you for your posts over the years. You have been a quite, major support to the hobby.

Thank you all.

Rick

wizard 06-10-2007 08:25 PM

I have the Raydot mounted to the windshield frame. Made the mistake of getting 2 flats. Convex on the passenger side is a must have, just like mirrors on current vehicles. Finishline and others have a braket which mount to existing holes on the windshield frame. Places the mirror about 1-2 inches ahead of the winshield. Look for the pic titled "Cockpit" in my gallery which should give you a pretty good idea of the setup.

pmfranke 06-10-2007 10:40 PM

i too have the windshield mount i can see over my arm that rests on the door most of the time. driverside was easy to make out of flat aluminum. passenger side needs a few bends and i little longer arm to get around the wings.i wish i had bought two convex raydots , flats have a very small field of vision .

tc_sj 06-11-2007 06:46 AM

Should I go with driver drive flat and passenger side convex OR both side are convex

Regards
TC


All times are GMT -7. The time now is 02:11 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: