|
jcs cobras
Has anyone heard of a company in Oregon that makes a 289 flat fender car? I think the company is called JCS. Thanks for the help.
|
I believe you would be searching for "JCF" info , or more properly "John's Custom Fabrications" I believe. If so last I heard they were located in Coos Bay, OR area.
They make slab side 289 styles and 427 s/c models, custom wheelbase lengths too if needed . There have been some threads here about them , some more recent as I recall suggesting they build a fine product but that their delivery timing is later vs sooner. In fairness to my faltering memory and JCF recollection, do a SEARCH here on cc to see what you get . The JCF owner's son replied to a couple of JCF posts several mos ago so I know they used to scan CC . There is a silver JCF slab side 289 car with chrome wire spokes from Mich that I have seen at the LCS in Ohio. I never saw the owner to talk to him but I looked closely at the car and it was very well done . Bill |
Here is the silver slabside mentioned. The owners are from St. Josephs, Michigan and offered my friend a ride at LCS 07 which just made his year!
Great folks and a great car. http://www.clubcobra.com/photopost/d...tures_0951.jpg |
John's Custom Fabrications
1515 Newmark Ave Coos Bay, OR 97420 Phone: (541) 888-9313 |
I have a JCF which I built mostly myself. Several owners of real 289s thought it was a real one. See at CENTECHWIRE site. Click on catalog and then kit cars.
|
jcf cobras
Thank you for the replies on the jcf Cobras, makes me feel a little better knowing they are a good car.
|
Jon,
Great looking slabside! I have always been a sucker for a nicely done SS. Do these cars have a 3" round tube frame with IRS? Most that I have seen are not that accurate inside? Jeff |
No, the JCF frame is rectangular tube. It is a very stiff frame.
|
| All times are GMT -7. The time now is 09:57 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: