|
AN Fittings & Oil Thermostst
Getting ready to order the last few items needed for my car,
What size AN fittings are needed for the oil cooler? (oil cooler will be supplied by BDR) Is the Mocal SP1T the oil thermostat that everyone in using/recommended? Found it for $84.95 at: http://www.racerpartswholesale.com/mocal.htm Thanks, Mark |
Oil cooler lines should be at least -10.
-12 is better, but that size can be tough to work with. Some thermostats and remote filter adapter have the ports too close together to use the -12 fittings. |
Mark,
Use 10an fittings. That is what is required by the oil cooler lines we use. Bill |
| All times are GMT -7. The time now is 01:32 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: