- -
pinion yoke
(
http://www.clubcobra.com/forums/all-cobra-talk/81889-pinion-yoke.html)
| coreyc |
08-31-2007 06:05 AM |
pinion yoke
I have a ford 9" rearend with a flange style pinion yoke. I had a local shop make up my driveshaft but the holes on the end of the driveshaft flange don't match up with the flange on my pinion yoke. They told me to bring in my pinion yoke and they would drill new holes but the holes would be too close or touching the edge. They said they could not find a flange for the driveshaft to match up with my rearend. Does anyone have a suggestion on how to solve this problem?
|
| Jerry Clayton |
08-31-2007 07:48 AM |
Change to a normal type yoke with u bolts
|
| All times are GMT -7. The time now is 08:33 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
