Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Engine install (http://www.clubcobra.com/forums/all-cobra-talk/82283-engine-install.html)

My Dream 09-18-2007 10:20 PM
Engine install
 
Can the engine and transmission be installed as a one piece unit on a new install into a Superformance? Is it necessary to raise the vehicle off of the ground for this work or can it all be done from the top side?

Thanks.

Roscoe 09-19-2007 07:29 AM
I installed the motor block, with rotating assembly, and trans as one piece. Once in I assembled the rest of the motor.

http://www.priveye.com/dls/engnew3.jpg

My Dream 09-19-2007 01:02 PM
I have the engine complete with heads intake and carb, will it stii go in in one piece?

ekrupa2 09-19-2007 06:28 PM
I am getting ready for my install. You drop the engine and trans in as one complete unit. I believe you can also mount one of the headers, and leave the other in the engine compartment for hook up after the drop. Also check this out for general reference.

http://www.fordcobraengines.com/Cobrakitproject.htm

My Dream 09-19-2007 10:43 PM
Thanks for the information. It doesn't seem to be a big problem. Good luck with your installation. My car should arrive in about one week, and the engine about a week later. Are you going to do the complete installation and finishing yourself? Some people recommend a professional installer do the work, but I don't see that it is too difficult. I wonder what the reasons are?

BMK 09-20-2007 12:13 AM
Having seen the SPF engine bay and footwells I think you should be good.

Just cover anything that may be scratched or marked.

I use a chain block and have the transmission down and then pull it up as it drops into place

ekrupa2 09-20-2007 05:22 AM
Hi Dream - yes I am doing the install myself (with the help of someone that has already done theirs...plus he has a hoist and engine lift :)) Once the powertrain is in, I will bring the car home and finish all of the odds and ends over the winter. My Roush engine should be ready in a few weeks.


All times are GMT -7. The time now is 01:25 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: