Club Cobra
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Learning about clutch set-ups. Need a little help (http://www.clubcobra.com/forums/all-cobra-talk/83330-learning-about-clutch-set-ups-need-little-help.html)

RodgerH 11-01-2007 11:16 AM
Quote:
Originally Posted by patrickt
Dang, didn't even know there was a D0TZ-7515B. I know there's a C8OZ-7515B that costs about five times as much and is a clip-type for the 390. Click on this link and tell me which one your 7515B looks like the most: http://www.autokrafters.com/v4/go.gn...Template=40002
Hi Patrick,

Nope, you haven't lost your memory! The number should have been EOTZ-7515-B. It's Dorman Part# 14553. Your link didn't have it listed, but you can find it at this link (It takes a minute to completely load):

http://www.rockauto.com/dbphp/mak,FO...92,Clutch+Fork

You can enlarge the picture in the item description.

Rodger

patrickt 11-01-2007 11:40 AM
Quote:
Originally Posted by RodgerH
Hi Patrick,

Nope, you haven't lost your memory! The number should have been EOTZ-7515-B. It's Dorman Part# 14553.
Good to know the Alzheimer's hasn't set in yet:D . Tallguy take note: On both of these forks the slave cylinder end is not drilled. You will want to drill a hole in the fork before you mount it (that will make adjusting the clutch a bit easier). Here's a shot of mine:

http://www.clubcobra.com/photopost/d...rk_drilled.jpg


All times are GMT -7. The time now is 06:27 PM.
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: