![]() |
Which speedometer gear for tranny?
I need to know which gear I need (and where to buy) for mounting the speedometer cable in the tranny. The rear end is a 3:31 and the tranny is a TR 3550.
Thanks, John |
Need to know what size tires. Hopefully someone can point you to the calculators. Once you know how many teeth just search the mustang sites. the 5.0 crowd uses the same speedo gears that we need, I think I bought 2 different gears since they were only $5 each.
|
John here's the calculator
http://www.sccoa.com/faq/speedgr.html this will tell you what gear you need Mel I'll get the part numbers for you. |
John.. hope this helps
number of teeth / color of gear 16 wine 17 white 18 yellow 19 pink 20 black 21 red Mel |
| All times are GMT -7. The time now is 08:39 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: