|
Oil cooler / AN fitting question
It seems that most Cobra oil coolers are plumbed with AN16 fittings. What's a M22 fitting? How is this different size wise and mechanically from a AN16? Can they be easily plumbed or are the fittings hard to get? A friend has a oil cooler i can use that's made to accept M22 fittings and I don't know of this will present any challenges, or if I should just pass it up and go for one with the AN16 fittings.
|
M22 is a metric size hose. A little harder to find than AN sizes. I didn't check Aeroquip directly, but I suspect they've got them. Mocal does too.
|
It's a 22 MM x 1.5 pitch metric thread fitting, common use is on pressure washer hoses...not sure where you'd get the fittings. It looks like they're set up to take O-rings between the male and female, is that right?
|
Quote:
Original 289 comp cars were set up with -10 AN fittings. I have never seen a car with -16 fittings. |
This guy has what you need. It is a special fitting for the Setrab has an o-ring. They are only about 13 bucks each, Monty also has all the hose and ends you will ever need,, prices are good too service is top notch.
Or you can do like I did- drive around for two weeks trying to reinvent the wheel and almost screw up your 300 buck cooler. Monty Holt Bits & Pieces (562) 420-3557 Bits & Pieces Motorsports - Hardware and Supplies |
| All times are GMT -7. The time now is 03:04 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: