Quick Time Bellhousings
Hi,
Anybody out there happen to know the web address for Quick Time bellhousings?
Your help will be appreciated.
Jeri
|
| RodKnock |
02-29-2008 04:10 PM |
|
| Got the Bug |
02-29-2008 04:17 PM |
Since the transmission is out of my car right now, I decided the timing was right to have a quicktime bellhousing installed. While the odds of catastrophic failure are low, it's cheap insurance.
|
| RodKnock |
02-29-2008 04:19 PM |
Doug, that's great. I bought one too. It's sitting right on top of my Tremec box in my garage collecting dust.
|
| Got the Bug |
02-29-2008 04:42 PM |
The guy who did my install as done a bunch of Superformance builds. In 5 years, he said that he had heard of one scattered clutch, and it's my understanding that there was no damage to the inside of the car (everything was contained in the bellhousing). Also, the failure occurred on the track.
That being said, I'm kinda partial to my legs.
|
Thanks for the info..
Jeri
|
| Ronbo |
03-06-2008 08:56 PM |
The quicktime bellhousing could pose a problem with big blocks since it lacks a starter pocket. The Kirkhams have to trim part of the starter rim area to clear the frame with the Lakewood housing and I don't know if you'd run into clearance issues. The Unique doesn't use a round tube frame so you may be OK.
Something to consider, the Lakewood can be trimmed if need be.
I'd check with Unique about this...
|
| xlr8or |
03-06-2008 10:09 PM |
The quick time housing fits just fine in the Kirkham without any trimming.
|
| Paul Gillespie |
03-06-2008 10:17 PM |
I put one on my small block this summer, it seems smaller than the factory unit. It is nicer looking and provide more protection than the factory unit.
|
| hi-tech cobra |
03-06-2008 10:31 PM |
Sorry for butting into the thread but I'm trying to get in touch with Ronbo,
Ronbo
I am in Jacksonville, let's talk sometime. I'm working on a Hi-Tech car with a CSX4000 body. Sent you a PM a while back and never heard from you.
|
| Ronbo |
03-07-2008 08:25 PM |
Ya, sorry about that. Kirkham had a bump on their orders so mine's on it's way earlier than I expected and I've been trying to get things ready around here. Rich should be delivering it next week and I still have years worth of junk in the garage...%/
The term SNAFU comes to mind...
|
| hi-tech cobra |
03-07-2008 10:02 PM |
Let me know when it comes in, I'd love to see it. I would really like to get an idea (by looking at your car) where my big block frame mounts need to go.
This is more pressing because Keith Craft just called and said my engine was ready to ship, kind of like you - earlier than I expected. **)
I live in Mandarin, where are you?
|
| All times are GMT -7. The time now is 04:58 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
