|
New Kirkhams, all aluminum FE engine for under 99,000.00
We can offer new Kirkhams for under 99,000.00 with new all aluminum 482C.I. FE engine and Tremec TKO 600 transmissions. Through our great relation ship with the Kirkham's we are able to help you with your Kirkham needs. We have built several of these cars and learned a lot of neat things to do to them and have several different engine packages available. In an effort to make sure that our customers get the quality they deserve and to check out the engine after the installation we have started doing complete turn key installs. We like to test drive the cars for about 100 miles to check all of the systems on the car and engine for proper working order. Call us with your needs. We have one complete car ready right now and several more coming for sale as rollers or we can build them complete for you. Thanks, Keith Craft
|
What is the total weight of car with the aluminum 482 engine & also whats the weight of the complete 482 engine carb to oil pan..
|
I forgot one more question.. do you take trades as I have some realestate that no one seems to want:CRY: and it's not even swamp land
|
trs900, your in Florida. Isn't land there kind of "in forclosure"?
:D :D |
TRS900,
Hopefully I am not stepping on Keith's toes by answering this question... We have weighed our cars with aluminum big blocks at 2180 pounds. |
Joe thanks for the info..
Trularin.. land is not in forclosure its just now being considered as down under.. what were not sure ?? With all the traffic you would think we are in a boom time, winters up north harsh as ever come on down and I will hook you up.:3DSMILE: even throw in a mini yacht.. see pic [IMG]http://i112.photobucket.com/albums/n...ale8-07023.jpg[/IMG] |
Joe, thanks for the weight info. I was wondering about that little factoid.
|
$45.41 a lb. Not a bad price for all that arruminum. :LOL:
|
Hey Joe, about the Kirkham's weight, did that car have a Quicktime bellhousing and one of your aluminum rear end housings? Were there any other special or out of the ordinary weight reduction items? Thank you.
|
moved to KMS weight post.
Note to moderator: please delete this post. |
Kirkham weight
Like Joe said the cars will weigh in the 2140 to 2190 depending on the engine and a few options. That is with the Kirkham aluminum rear end which is the only way that we get them. I had a Kirkham that we took to Run-N-Gun a couple of years ago with a Shelby block all aluminum 527 FE that weighed 2150 with 10 gallons of fuel. We put it on the scales after setting the ride height and could not believe that the car was within 8 pounds on all four corners. That was prety neat and the car worked real well. Thanks, Keith
|
keith what kirkham options are included in this price?
thanks |
This is either the brushed or polished aluminum car with the opposite stripes, visors, side vents, wheel foam, complete oil coller system, Kikrham billet aluminum hydraulic clutch linkage system, side pipes, billet engine and trans mounts, wool carpet, trunk mounted battery, billet over flow tank, larger front brkaes, Penske shocks, billet lift jacks, all aluminum 482 FE engine with TKO 600 transmission, bell housing, McCloed flywheel, clutch and pressure plate, billet shifter, drive shaft with installation, set up, alignment, tuning and test driving for at least 50 miles to check all items. The engine is dyno tested before installation and tuned after installed. There are a few options I probably forgot to list. Feel free to call with any questions. Prices will be going up on next shipment of cars. Thanks, Keith
|
| All times are GMT -7. The time now is 07:23 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: