|
Isn't that a relief!! Good going.
|
:)
Glad that you got it going. Now be sure that you draw yourself a diagram of just how you wired it for future reference in case you need to do something else. Ron :) |
Glad you are up and running. I doubt it was the battery connectors. You shouldn't see 12 volts through them if they were bad. I have gotten bad regulators before, but I would lay may money on the Batt wire to the fuse box, and then back to the battery. Even if there was good connection in the fuse box, there may have been a break in the wire somewhere along the way.
Do like Ron said, and draw a diagram of your changes. It may seem like an easy one to remember, but 5 years from now, after you have made some other changes, it can get confusing. |
| All times are GMT -7. The time now is 11:59 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: