|
Where to get Pins for Knock offs
Hi All
I have a couple of questions. 1) I have a set of PS Engineering wheels and would like to get new Pins. I am using a 8.8 independent rear. I pulled off my tire and noticed that the Pins ( threaded lugnuts) are cracked and would ike to get new ones. 2) does anyone have the part number for the hat when using the 2 piece rotor from Wilwood? 3) What is the best way to remove and replace the stud in a wheel hub. I have always used a lug nut to pull them through but wanted to know if they sold a tool to do it the "rightway" Thanks |
1 Vintage Wheels Bob and Margot Lacey
2 I've been getting some offset rotor hats from Stock Car Products and making flat ones 3 If you can access the flange they can be removed and installed in a press, using the lug nut to pull them through is fine just make sure they're square and you don't bottom out (bugga up threads). You already know why they have the smaller diameter unthreaded part to get them out with the BFH;-) |
| All times are GMT -7. The time now is 07:58 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: