|
clutch slave cylinder
Do you guys have a picture of your slave clutch cylinder preferably on a t-5 with the stock bell housing,i need some ideas 'cause i need to buy one but they don't sell the brackets,thanks
|
slave cyl. bracket
Hello, here is a photo of a slave cyl. bracket I made for a 289 Cobra with a original 5 bolt COBRA bell housing. It is a piece of 1/4" x 1.5" angle with a slight curve to match the arc of the bell and a mounting point for the CNC slave cyl. It can not be too much different from what you need.
regards, karl http://www.clubcobra.com/photopost/d...s/HPIM0850.JPG http://www.clubcobra.com/photopost/d...m/HPIM0850.JPG http://www.clubcobra.com/photopost/d.../HPIM08521.JPG |
Forte's shows one, not sure if its what you want
http://fortesparts.com/productPhotos/599.jpg http://fortesparts.com/catalogDisplay.cfm?cat=128 |
Be aware of the differences between the ones that "Push" or "Pull" type cylinder. This is a clone of the OEM type that used a "push" type, it uses an OEM slave with an aluminum instead of fabricated steel mounting bracket.
[IMG]http://www.clubcobra.com/photopost/d...re_221__2_.jpg[/IMG] |
1 Attachment(s)
I'm using a push type Tilton slave cylinder with mine on a T-5 with a stock bellhousing.
You can buy the bracket, I got it from DazeCars, you can google them for their web address. The bracket fits perfectly. I attached a picture below, click on it to get a better look. PM me if you need any more info. Randy |
1 Attachment(s)
Here's what I used, got the kit from JMC Motorsports 619-401-6900
www.autoworksracing.com. Worked great no problems. Jim |
Quote:
That's exactly what I'm using & it does work great. Randy |
slave cylinder
Thanks guys it's exactly what i need,i will contact them to see how much they want and if they can ship in canada,cheers
michel Quote:
|
You're welcome Michel.
I asked that same question a while back & I'm just passing along the info I received from the fine folks on this forum! |
Thanks Randy,i contacted Donald at D&D Cobra my manufacturer and he has the kits and he will give me one.
Quote:
|
speedway motors unit. I used a angle bracket to the motor mount.
http://www.clubcobra.com/photopost/d...ium/slave2.jpg cheers rdc |
Thanks guys,what i was looking for is like the picture JIM posted,a push type style,cheers.
Michel |
| All times are GMT -7. The time now is 05:42 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: