|
SPF question
What are the main differences between an SPF # 1997 and the newest ones coming off the production line
Has there been any significant changes to the body ,drivetrain , interior , etc. Any input would be appreciated Thanks Rob |
Here are a few: BDR rear end vs. Ford 8.8; revised rear parking brake;single piston vs. 4 piston rear calipers.
|
Both have the latest style wiring harness versions, but a few wire colors may have changed. Nothing serious.
Rubber brake hoses were replaced by S.S. hoses. The center rod on the Mk III windscreen was discontinued. Newer Mk III chassis can accommodate the Quadcam engine and headers. |
It is Dana rearend vs Ford 8.8, not BDR.
|
BTR. Sorry, I have been working on a Backdraft all day.
|
| All times are GMT -7. The time now is 01:07 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: