|
High Build Undercoat recommendations
I'd like to see if anyone has any high build undercoat recommendations for the wheel wells. Preferably in a can. I have Wurth right now and it looks great but is not high build by any means.
I might not be able to get the look I am looking for unless I buy a gun and undercoat kit but I'm looking into my options. TIA. |
428,
You might try a couple of products from Dominion Sure Seal. Both in an aerosol can. 1. Rubberized Undercoat (high build) #SUR 2. Aerosol Bedliner #SEZL Buy a can of both, spray on some scrap and see what gives you the build/texture you want. Should be available at automotive paint stores. SkipB |
Thanks Skip.
|
Street,
I bought some 3M rubberized undercoating in a spray can from the local Napa Autoparts- worked great and it still looks like new 5 years later. |
Chaplin:
Did it give you a high build look or was it like spray paint - meaning just a film coat? |
It's pretty thick- it looks like a sprayed on bedliner. If I remember correctly, I think I used about a can or a can and a half per wheel well.
|
Frankie baby, that stuff I told you about sounds like the same stuff Chappie used.
|
I used Herculiner on mine. Took me most of the weekend, but I got 5 or 6 coats in each wheelwell. I wasn't all the concerned about how it looked. I was concerned about protecting against rock chips.
|
The undercoating under the car will also help keep the road noise down, I did the whole under neath of my car, and it works very well, and looks sharp too.
|
| All times are GMT -7. The time now is 06:31 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: