|
Roush valve covers
Hello,
I've got a 2003 Roush 402R. It's seeping a bit of oil from the right side of the valve cover (looking at the engine from drivers side). The bolts were pretty loose, hardly registered on torque wrench). I've tightened to 6lbs on advice from motorhead neighbor. Does this sound right? The covers are aluminum. Also, are the old style Craftsman needle type torque wrenches good? Thank you. |
I have a 402SR and the Roush dealer recommended 10 ft lbs for the valve covers. If your valve cover has been leaking for a while, you may need to replace the gasket. I had to replace one side and used Fel-Pro part number FPP-1645.
|
thanks, doug.
|
| All times are GMT -7. The time now is 12:30 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: