Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   90 deg. molded connectors (http://www.clubcobra.com/forums/all-cobra-talk/93318-90-deg-molded-connectors.html)

my427cobra 11-30-2008 10:44 AM
90 deg. molded connectors
 
Hi all. I am doing my wiring and I am looking for the 90 deg molded female bullet (pin) connectors like you would find on 60's Fords on the ignition coil posts, brake lite posts and solonoid posts.
I have search all over for them. Not interested in the hardware store styles. They are avilable already wired in aftermarket harnesses for the restoration market, but I can't find them separately.
Most are black molded (some red, some greenish-yellow) and would have a length of wire already molded in.
Has anybody seen these available anywhere????
Look forward to hearing from anyone who can help.
Greg

patrickt 11-30-2008 11:44 AM
Quote:
Originally Posted by my427cobra (Post 901571)
Hi all. I am doing my wiring and I am looking for the 90 deg molded female bullet (pin) connectors like you would find on 60's Fords on the ignition coil posts...
Like this?

http://mansfieldmustang.com/06-69.jpg

my427cobra 11-30-2008 01:55 PM
Hi patrickt. Those are the ones! Any idea where I can buy these not already assembled into a harness? If not, what is that harness you pictured? I might have to by a number of those and splice them into my harnesses.
Thanks
Greg

patrickt 11-30-2008 02:57 PM
Quote:
Originally Posted by my427cobra (Post 901628)
Hi patrickt. Those are the ones! Any idea where I can buy these not already assembled into a harness? If not, what is that harness you pictured? I might have to by a number of those and splice them into my harnesses.
Those are from Mansfield Mustang. They reproduce old Ford big block and FE stuff as well as sell NOS stuff. Call Bill Upham at (508) 339-5409 and, if you're lucky, he'll have a box of them on the shelf and, if not, he'll know where you can get them without the harness (which they do sell).

my427cobra 11-30-2008 03:03 PM
Thanks patrickt.
I'll call him tommorrow.
Greg


All times are GMT -7. The time now is 12:20 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: