|
Hi Bob,
Over the last two years I have gained a true appreciation for the FFR. I spent 5+ years and a ton of money building my JBL (my bride of Frankenstein) and it is truly a one of a kind beauty. But building that car was something I had to get out of my system. Honestly, and before I pulled my head out….., I used to poo poo the FFR for what ever reason, like I was so above that type of car. That was before I bought my FFR spec racer on a whim. I have to tell you that I am now humbled by the car, the engineering, simplicity, very easy to work on, and what you can do with one on the track. They are very rugged, can take a lot of abuse, and you can make them stick like snot with the right setup. All kits will have pros & cons if you plan to build your own. Believe me, there is plenty to frustrate you with any build. There is a ton of support for the FFR builder/owner and the quality and completeness of their kit is very good. I’ve had so much fun and made so many great friendships with my spec racer, my JBL is now pissed at me. I spend 90% of my shop time working and improving the spec. It’s what I’m really excited about these days. If you are a meticulous person you can pretty much build any kit car nicely and I’ve seen some pretty nice FFR street cars too. Remember, you can spend a lot of money on any car, but the bottom line is to have fun! Good luck with your endeavor and hope this helps. I don’t think you can go wrong with a Factory Five. John |
Quote:
http://quintewheels.com/index.php?op...d=30&Itemid=57 http://www.tc.gc.ca/roadsafety/tp243...u.htm#amateur1 http://www.tc.gc.ca/roadsafety/tp2436/rs200804/faq.htm Cheers, Mark |
Looks like the key is what the kit contains for parts, that will determine entry or not. What seems to be the problem with most kits is they contain too much to be considered parts and not a vehicle. FFR has addressed this with the so called Canadian version. I don't think anyone else has stepped up to the plate. I like the flexibility with FFR and the support. Al at Canadian Cobra can offer more insight. He lives in White Rock too! I just saw his website.
Keep in touch on issues down the road. Bob |
Quote:
Nice note, you are what I would consider an expert based on your various cars. Being in Vancouver, FFR may be my only logical option. I am a former mechanical shop owner for many years though not a wrench turning mechanic. I have rebuilt and repaired various toys but fabrication and body work will constitute my largest learning curve. I look forward to some of the drudgery. This car will be a cruiser with some autocross possibilities. I have thetime and need a passion more than anything. Budget is not a big issue though I am frugle and what the best bang for the buck. I DO want the satisfaction of building it myself! Paint my be another question. Any other suggestions would be appreciated. Bob |
Bob,
I'm no expert, but do have a bit of experience with all of the above....Being that you are in Canada, I suggest that you give not only FFR a look see, but D&D also as they put out a really nice product and are based in Canada (no import hassles to deal with).....Again, welcome to the madness where building the car is only half the fun......... Bill S. |
Factory Five makes a very good car the problem is dealing with the restrictions put on imports by Transport Canada. I am sure that Al Belix can help with sourcing the missing parts and provide info on the build and when I was thinking of purchasing he was a great help. I didn't end up buying a Factory Five but I bought a D&D out of Quebec the cars are close and the ability to buy with Canadian money was the deciding factor. Do your research and compare the two cars as in what is included and what options are available then factor in the exchange rate. Search this forum for Hawkeye he lives in BC and has a D&D under construction and send him a PM you may live close. If you click on the camera under my name there are a few pics of my build.
Cheers Greg |
Being a FFR builder and owner. I had the same questions as you when trying to decide on brand.
After resaerching for 2 years. Finally chose FFR. Probally the main reason aside from price. The large support avalible for the forums. Doupt you could have a problem that has'nt been addressed and disscused of their forum. Originally they were designed to be build around a "donor" car useing the donors drivetrain and suspension. Since then they now have a complete kit option. It includes most everything needed other then engine,trans and rear. Less need for a donor vehicle. Body work needed was untill recentlly was a big part of the expence or labor if doing this your self. Newer body so far are much better and need less work more so when dealing with the mold seams. Yes they are not as correct body line wise as some other makers. Mainlly in the trunk area, known as the "perky butt". However unless a person really knows what the correct body lines are. These difference's would never be noticed. The main advantage to the ffr kit. You have the option of doing a basic build. Or the choise of makeing mod's along the way. Basiclly build it like you want. The company itself is very good when it comes to cutomer satisfation. "Most" ffr owners will agree to this. Haveing worked on. Repaired, and been involed in several brands of cobra kits. Personally have to say ffr is probally the easyest to build,espeacally for the first time builder. Mainlly due to it's support forum. May want to take some time to vist the forum and read thru some post. It should give an idea of whats involed in building your own cobra. Good luck with whatever choice you make:) |
FFR has an agreement for importing kits into canada. You really should give FFR a call, they'll explain the details...
HTH, :) |
FFR ...great customer serivce...good price...fun to buid...strong product.
|
My desire is to build an ERA like many others. I have contemplated for years on what combination I would build, ie. what wheels, engine, trans, brakes....289 FIA or 427... and my Dad went and bought an FFR that was already finished, and although it has some undesirrable handling traits, it sure is a blast to drive! I love it everytime he hands me the keys, and we go for a spin. I don't think you can go wrong. They are so much fun, and if you build it yourself you can be even more proud.
|
|
What Period?
|
With the current economy I'd be looking at the company as much as the product they produce.
I don't want to sound like a Negative Nancy but to protect your money and investment I'd consider the following. Will they be around in another year or two? Availability of replacement parts? Support with the build even if the company goes away. Good luck with your decision. |
Quote:
Thanks Bob |
A&C is in Buffalo, NY. I'm sure they've dealt with the Canadians.
Roscoe |
Quote:
Hi Bob, You can call me at the shop on monday 450.658.2315 or on my cell 514.806.2060 Thanks Don, |
I agree with Elmariachi! research......research ....research.
FFR's are great machines, but do a good amount of research and determine what you really want and how your going to use it. Evaluate all the Cobra producers, they're respective benefits, advantages and the disadvantages. Make an informed choice so you are always happy with how you spent your money and what you ended up with. Bill |
Aside from authenticity of the body shape, the biggest negative that I've seen with the FFR's is the quality of the build, and you can't put that on the manufacturer. It will end up being whatever you make it!
|
Quote:
|
| All times are GMT -7. The time now is 02:22 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: