|
T5 Question
I have a 1984 T5 in the Cobra & I'm getting ready to change the driven gear. I installed the present gear/cable during my build when there was no fluid in the tranny.
Will I lose any fluid when I pull the cable/gear from the tailshaft? I'm thinking that I won't or maybe just a small amount.%/ Just want to confirm my own thoughts. Thanks. |
If you are talking about changing the speedometer gear on the transmission, there should not be any fluid coming out of that hole when you remove the cable-gear.
|
Quote:
Thanks for confirming that for me.:) This place is great! PS - I see you're in Pottstown, PA, I was born in Allentown & raised in Quakertown, small world! Randy |
| All times are GMT -7. The time now is 12:38 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: