- -
Rock/Fender Guards
(
http://www.clubcobra.com/forums/all-cobra-talk/94904-rock-fender-guards.html)
| Atlantacobra |
02-23-2009 07:37 PM |
Quote:
Originally Posted by Bryan Wilson
(Post 923255)
|
Oh man, I really like the look of those. I went to the website but couldn't find at first glance. I'll go back and look again when I have some time. Do you remember the cost - in U.S. Dollars? |
| CobraDaly |
12-10-2015 01:26 PM |
Hi,
I know these threads are old. I haven't had much like in finding these anywhere. Anyone know the best place to locate these fender SPATS?
|
| FUNFER2 |
12-10-2015 03:19 PM |
2 Attachment(s)
I was not happy with the ones you can buy, so I just made them out of leather and my wife sewed the edges. I lightly glued them on so I can replace them someday. Low cost and easy. ;)
|
| TheExtreme |
12-20-2015 02:08 PM |
I ordered a 2'x5' sheet of carbon fiber look sheeting off of ebay for $17. Measured it out and put them on with the help of a heat gun. Fairly easy and look good. Had to trim a bit due to stretch using the heat gun.
|
| TheExtreme |
12-20-2015 02:22 PM |
2 Attachment(s)
Kinda hard to see. Put it on top of the doors, also.
|
| cycleguy55 |
06-22-2016 03:23 PM |
I know some folks have used Plasti Dip, but my fenders have a few chips that I think will show through Plasti Dip, so I'm looking for something that's perhaps a bit thicker, with a bit more hiding power. Anybody use undercoating spray or liquid? Something like this: Kleen-Flo | Products - Tumbler Paintable Rubberized Undercoating |
| FUNFER2 |
06-22-2016 04:12 PM |
You can always use body filler in the small holes, sand and apply what you want. ;)
|
| fordracing65 |
06-22-2016 07:20 PM |
Quote:
Originally Posted by wtm442
(Post 922852)
Do a search within CC for 3M.
My car had the 3M Invicta Shield applied when it was brand new by a company near the SPF dealer. It cost $450 and was/is warrantied for 5 years.
Very hard to see the shield, even on my titanium Cobra.
Can you see the shield on the front end or the leading edges of the rear flare?
http://www.clubcobra.com/photopost/d.../DSCN16221.JPG
I would recommend it to anyone.
|
They will do clear bra here for $50 bucks a side. |
I'm in the process of another rebuild on my Unique. It's an older body style so it has the street roadster style rear flares and once again I'm contemplating ditching the roll bar and sidepipes. This thread rekindled my interest in sourcing the polished aluminum spats and it seems the only place they are available is at Europa Spares in jolly olde Blighty. A search of their site revealed these:
http://www.europaspares.com/wheel-ar...rch-spats.html |
| mikeinatlanta |
06-23-2016 07:15 AM |
I've posted this before.
I used to manufacture clear bras and have plenty of old stock. I'm not interested in doing a 3M front bra, but anyone in the Atlanta area can get spats or other small areas done here for the price of gas and some beer to drink while WE do it. What I won't do is let you drop off the car for me to work on, that costs $$. This is for clear only. I don't do the CF. You can use my wheel if you want to give aluminum ones a try.
|
| All times are GMT -7. The time now is 03:47 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
