|
Ball joint help
I need new lower ball joints for my lonstar cobra. They are the screw in type. I believe they came from Chrysler, off of an upper control arm. Any of you lonestrar guys know what the part number is by chance?
Mat |
Moog ball joint
Mat, Not sure if you got your answer, but many of the aftermarket Mustang II type control arms are using the screw-in type ball joints. Yes, my understanding is Chrysler has used these from the 50's up until as recent as 1989 ! The replacement screw-in joint I found is from MOOG. Part number K-727(LOWER) K-772 (Upper) these should be easy to find.
Go to suspension.com for heavyduty PU dust boots for these as well. |
| All times are GMT -7. The time now is 07:03 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: