| dalew |
04-07-2009 04:19 AM |
Wind Wing Thickness and logo
I have a 1981 Stallion with two different wind wings. One is 3/16" thick and the other is 1/8". The 1/8" is broken and appears to be the original. They both have the same pattern. The 3/16" has Stallion etched on the bottom but it appears to be done by hand.
What is the correct thickness for the Stallion wings? Are there any logos etched on them?
|
| CobraDan |
04-07-2009 06:11 AM |
3/16 is the norm and they use to have the word COBRA embossed in gold at the bottom but since the Shelby incidents they are left blank, you can also get them in glass instead of plastic.
|
while the advertised thickness of the plexiglass used is 3\16 it actually mic's out to be .225 the stallions wings are shaped a little different to clear the trim on top of the door.
|
| All times are GMT -7. The time now is 01:20 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
