|
Identify, Please (air cleaner parts)
Following is a picture of an Air Cleaner (top and bottom) that I received when I purchased my Cobra a few years ago. It's probably really old. - possibly from the 1960's.
1. Is this an original 'part' for a real Cobra or is it an aftermarket item? 2. I'm assuming that it's for a 2-4 barrel setup or perhaps not with the one hole in the middle of the bottom section (each section is 21" by 10" [huge air cleaner])? 3. Any idea where to get the middle part - the Air Cleaner element? 4. Are there other parts missing - this is all I have? I'm thinking about doing something with it in the future, just wanted to know some history, if available from someone here. Although, it's surprisingly heavy material. Thanks. |
its a reproduction of the 2 four bbl air cleaner made with a base to fit a single 4.
i have one too, K&N makes an element....# C207AB there's a flat piece of steel missing it has a hole in center to attach to the carb stud in the airhorn, and two studs to tighten the air cleaner down. i will look to see if i have the bracket, i'll make a drawing of it Fred |
I'd love to help you, but I can't see anything beyond your wonderful avatar. :D
-Dean |
here's where to get the bracket...........
http://www.cobranda.com/inhakitforov.html http://ep.yimg.com/ip/I/yhst-1352518...2_2054_1013330 |
Quote:
What about the air cleaner element that fits between the top and bottom? Nevermind - I see you also posted that information, thanks again. |
Quote:
|
i have a dual 4 bbl one on right now, but only because i can't find anything better to fit under the hood. they are restrictive for flow purposes, so if you can get a bigger filter element under the hood use it. the # i gave you was for the element i can use under my hood. its about 1.75 inches thick. K&N does make a thicker element the same oval size. i think summit racing has them shown on their web site. they are so heavy because they are cast aluminum.
Fred http://www.clubcobra.com/photopost/d...bb-001F_1_.JPG |
Thanks, it sure has a nice look.
|
| All times are GMT -7. The time now is 12:36 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: