- -
Cobra security
(
http://www.clubcobra.com/forums/all-cobra-talk/99467-cobra-security.html)
| lovehamr |
09-09-2009 10:21 AM |
Quote:
Originally Posted by patrickt
(Post 981731)
All I've got to do is lob a few salvos at the likes of ERAChas, Tbuttrick, or a few of my other fans and I'll have this place hopping....;)
|
I'm sure doc385 would be glad to interject at a moment's notice!:LOL:
Steve |
| saki302 |
09-12-2009 07:08 AM |
Take your distributor rotor off when you park it :D
On my old 94 Mustang I had a fuel pump kill switch hidden in the bracing of the trunk lid. It's MUCH easier to disable an old tech car than a modern one.
I'd be more worried about someone towing the thing than trying to hotwire it.
If it's cold, they have to follow the 'ritual' to start it anyways :)
-Dave
|
| Gary Stubbs |
09-12-2009 09:15 AM |
I do not recall who came up with this security deterent from an earlier thread, an empty pistol holster on the console or seat.
|
| 427PMS |
09-12-2009 09:39 AM |
If your doing a new build you can put in a ISIS intelligent multiplex system which you can disable it from being started and still will not be able to be hot wired . I dont know alot about this system but I just ordered one for my on going build .
|
| Argess |
09-12-2009 07:50 PM |
Odd, I've never thought about anyone stealing it.....just vandalizing it.
|
| dcdoug |
09-13-2009 07:16 AM |
Quote:
Originally Posted by 427PMS
(Post 982907)
If your doing a new build you can put in a ISIS intelligent multiplex system which you can disable it from being started and still will not be able to be hot wired . I dont know alot about this system but I just ordered one for my on going build .
|
If you already have a built car, the Ravelco essentially does the same thing and its nearly impossible to even know that it is installed. |
| priobe |
09-13-2009 08:00 AM |
One thought is is to install a simple relay for a starter or ignition kill, and place the relay at the coil area (hidden) or at the starter.
The on problem is if that relay fails by the starter your not getting to it either unless you disassemble the start or push start.
You would have to hot wire at the device
|
| All times are GMT -7. The time now is 02:40 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
