|
Need a bigger hole (for my exhaust pipes)
I have tried and tried to figure out ways to keep the heart of the cobra from moving to much in the engine bay but I have run out of ideas and it has come clear to me that I just need to make the driver side body hole a bit larger. The car is a recently build ERA with a 427 sideoiler motor in it.
Has anyone had to open their holes up on a painted car and if so do you have an suggestions how to go about this and what tool(s) I should use? Kramer |
Modify the left engine mount! It should fix the problem
http://www.erareplicas.com/427man/en...tmod/index.htm |
| All times are GMT -7. The time now is 01:21 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: