|  | 
| 
 Infrared Thermometer Can anyone tell me approximately what exhaust header temperatures I might encounter under hard driving conditions? I'm thinking of buying an infrared thermometer for another project and I wanted to get one with a high enough range to measure header temps on the cobra. Any advice or recommendations? | 
| 
 I think less than 1700 degrees. Mine at idle is 400 to 500 range. Running hard for a long time?????? Dwight | 
| 
 DH -- here's a thread we had recently that dealt with exhaust temps. http://www.clubcobra.com/forums/fe-talk/97923-428-timing-post973430.html | 
| 
 Thanks, that's a beginning. Coould I ever expect surface temperatures in excess of 900 degrees on the headers? | 
| 
 Probably not unless you're way lean. | 
| All times are GMT -7. The time now is 10:47 AM. | 
	Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
	
Search Engine Friendly URLs by vBSEO 3.6.0
	The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc.  clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: