|
Trans Frustration
Just wanted to see if there any trans experts in the house. I have a T5, I had the drive shaft made this past week and when I tried to install it in the transmission it only goes in about 1 3/4" and stops. I can force it in but I can no longer turn the shaft by hand. The slip yoke mics 1.500 like it calls for. It seems to be hitting on the od of the yoke. Please help.
Thanks Joey |
Ok two things to look for. First one is if you got your trans new the plug that they put on the out put shaft may be pushed in there. I have seen them come with no end on them its like a rubber spine sleeve that can get pushed in and not seen easily. Second thing is there are two types of yokes one comes with a hole in it to let air out as it goes in and out, if the out put shaft has a o ring on it and if your using the one with out the hole and the o ring out put shaft it will not go in all the way and if it don't have the o ring it has to have the yoke with no hole in the end.
Stop by and see what we are working on @ www.eddytheb.com |
Trans Frustration
Thanks, figured it out. I'm back in business.
|
| All times are GMT -7. The time now is 12:08 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: