|
location of remote oil filter
Does anyone have any suggestions on the locatoin of the remote filter. I'm looking at the upper crossmember in front of the engine. I'm afraid if I mount it on the left side it will interfere with the steering u-joint.Will it be in the way of anything on the right side?Anyone with it mountes somewhere else? Thanks Richie
|
The original location is on a bracket off the front of the water pump that goes between the pump and the OEM filter mount. On FEs, in ERAs, Kirkhams and CSXs at least, it's not in the way of anything there.
I'm not sure if that will work on a small block or in your engine compartment, but it's what you want to attempt if originality or original looks are in any way important to you. Surely there must be an SB variant of the bracket out there...? |
This is a 390 same on the 427 car I did, I don't know if it helps but may give you an option. I had to make the bracket but the housing was bought at finishline.
http://eddytheb.com/wp-content/galle...a/mvc-022s.jpg |
Richie:
I made a plate and mounted it to the upper crossmember. Then mounted the oil filter mount to it. On the other side of the mounting plate I mounted the oil thermostate for the oil cooler. Worked out fine and easy to get the filter off and on. Look in my pics. Jim |
Check page 3 in my gallery. I used a 3/8" aluminum plate and some 1" aluminum round stock for spacers to mount it to the front of the head above the fuel pump. Make sure the bottom of the oil filter clears the fuel pump when it has to be removed.
|
This is mine.
http://www.clubcobra.com/forums/pict...d=2648&thumb=1
Had to make sure it was high enough to remove filter. |
Cheers for the photos guys, v useful for novices like me...
|
| All times are GMT -7. The time now is 01:25 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: