|
1.75" roll bar bezzles
who makes a roll bar bezzle for a 1.75" roll bar...I tryed finish line
they had them for 2" and 1.5" Jon |
Jon:
I could never find them. Looked into something special made from stainless by a friend but decided to buy the 2" ones from Finish Line. Just filled the gap around the seal to the bar with Black Silicone. Look fine! Jim |
http://eddytheb.com/projects-in-progress/larrys-cobra/
I use the rings from finish line and make my own trim to match the interior see photos at link. |
|
You can always make you own. Took a few hours but worth it. Just need a large hole saw and a drill press. The aft bezels need to be hog out a little a bit.
http://www.clubcobra.com/photopost/d...m/hole_saw.jpg http://www.clubcobra.com/photopost/d...ium/polish.jpg http://www.clubcobra.com/photopost/d...ish_bezels.jpg |
Check my gallery for a tight fitting bezel. I will be putting polished rings in theses when i get time. Picture next to them explains where to get.
|
| All times are GMT -7. The time now is 07:57 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: