- -
Cobra walk around video
(
http://www.clubcobra.com/forums/antique-collectibles/128041-cobra-walk-around-video.html)
| MCDSiena |
03-09-2014 04:39 PM |
Cobra walk around video
|
| rcobrakit67 |
03-09-2014 04:53 PM |
Your cobra looks and sounds insane!!!! great job, Richie
|
Nice job with the build. It will soon be warm enough to take it out for a spin. Good luck with the inspection. Where are you located?
|
| MCDSiena |
03-09-2014 06:23 PM |
Thank you. I live in Clifton Park, NY just a little north of Albany. I've never had good luck with the DMV for anything over the years, I am hoping any inspection issues don't cause me to miss any warm weather.
|
| blown871 |
03-09-2014 07:05 PM |
Me likey!!
tell us more about it..........
|
| twin turbo |
03-09-2014 07:53 PM |
Sounds great!
|
| CSX3183 |
03-09-2014 08:17 PM |
Really nice looking, sounds great, what are the specs on the cam?
|
| MCDSiena |
03-10-2014 08:28 AM |
428FE, Edelbrock heads with mild work built by Brent at B2 motorsports, Comp cams roller lifters, Rockers from POP, Hydraulic Roller cam (duration@50 230/240 lift 553/555) Holley 750cfm 4150 double pumper, Edelbrock Streetmaster intake that has had some porting done.
|
| buddyg |
03-10-2014 02:07 PM |
Sounds very healthy! Congrats and good luck with DMV
|
The motor sounds great, what is the estimate on horsepower? I just took another look at the video, and coming fresh off of a project in which I installed a heater/defroster in my car, I did not see any defroster vents on your dashboard. Did I miss them? NY will require defrosters to pass inspection. They normally do not check them during the regular safety inspection, but because it is a new build I believe that they are going to see them during the initial inspection.
Check with others to verify. There are quite a few cobra owners in your area and they will know more specifics about what the inspectors in your area are looking for. Good luck.
|
| MCDSiena |
03-10-2014 08:05 PM |
Correct I have no heater/defroster. I have heard that the inspectors don't care as long as you get past the paperwork/pictures part, but as a back up I will use a marine 12v electric defroster temporarily wired in.
As far as horsepower I'm hoping for around 500 not sure if I am there or not. This is my first FE build. Much more familiar with Ford small blocks.
|
| muleman |
03-20-2014 05:05 PM |
I have a 67 428 pi motor. Stock pistons, elderbrock rpm heads, elderbrock performer rpm intake. 830cfm quick fuel carb, 605/605 comp cam, and it did 407hp on the dyno with junk headers. with no port work.
|
| CSX3183 |
10-21-2014 11:39 AM |
Further info
Who manufactured the cam, what is the overlap, and is it 107, 108, 110 ???
Quote:
Originally Posted by MCDSiena
(Post 1290493)
428FE, Edelbrock heads with mild work built by Brent at B2 motorsports, Comp cams roller lifters, Rockers from POP, Hydraulic Roller cam (duration@50 230/240 lift 553/555) Holley 750cfm 4150 double pumper, Edelbrock Streetmaster intake that has had some porting done.
|
|
| All times are GMT -7. The time now is 10:34 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
