|
Tire clearence
Anyone running a 17"×11" in the rear? Manual suggests 15×10 with 4" backspace. I would like to run a 17×11 4 1/2" backspace. Joe said it shouldn't be a problem. Thanks ,Richie
|
This is what I`m planning on doing also.
If you dig a little deeper into this sub-forum, you`ll read where people have done this successfully. What kind of wheels a re you going with? I`m planning on running the AC-III from ET Wheels. |
17x8 5.25 backspace on front. I have wilwood brakes and hubs which give me +.75 hub offset. 17×11 4.5 backspace for rear. I called team lll they were very helpful. I also looked at American Racing vn407 rims. I will probably be going with team lll. Richie
|
Wheels
I'm using Colorado Custom wheels 12" wide on the rear without spacers. 335x35x17 tires They fill the wheel well with a good fit.
|
| All times are GMT -7. The time now is 12:27 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: