Anyone know what these are?
|
Could it be a cradle for mounting something like an IRS pumpkin? Those square plates look like the cutouts are sized to accept the ends of large angle iron mounting bracket and that assembly looks to be approximately long enough to mount between the frame rails.
If not, I'm clueless, as usual :eek: Cheers!! Dugly :cool: |
The flat plates with the "L" shaped cut out go in the trunk and cover the section of the floor thats cut out where your bumperettes/quick jacks mount.
The other 2 pieces look like they might be the mounts for the rollbar. |
H-Rod is correct
The two metal brackets are for the roll bar mounting I felt the roll bar was not tall enough, so I had made some extension pieces. They were made from 1-3/4" heavy wall tubing with one end turned down to fit inside the roll bar ends and welded on. I am trying to remember I think I added 3" or so. This way it conformed to the rule about top of roll bar to top of fender straight line, your The top of your noggin needs to be under the line. |
It's a phister which connects to the cunooter
|
Why?
I did not want to respond before, but really, why? |
All times are GMT -7. The time now is 01:27 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: