- -
A&C headers
(
http://www.clubcobra.com/forums/antique-collectibles/143837-c-headers.html)
| cobrabritt83 |
07-17-2020 01:22 PM |
A&C headers
1 Attachment(s)
Does anybody who owns an A&C kit know what the difference is between the driver and passenger side headers are? Both headers I have look the same.
|
| olddog |
07-17-2020 02:35 PM |
I don't understand the question. They are mirror images. The rear cylinders are the ones that neck in tight. Are you wondering about the stagger of the cylinders? I think the body is slotted large enough to accommodate on mine. One side is tighter to the front of the opening. The other is tighter to the back.
|
| 6TNCRZY |
07-17-2020 03:41 PM |
Based on the offset of pipe exit it looks like the left goes on the right and the right goes on the left.
|
| cobrabritt83 |
07-18-2020 10:32 AM |
I bought these quit awhile ago and I remember speaking with Joe, he said to make sure to use the passenger side header for your measurement when placing the engine in the frame. I just wanted to make sure the way the headers are in the picture are the way they go on the engine.
|
| 6TNCRZY |
07-18-2020 11:33 AM |
The passenger side of the engine is about 3/4" ahead of the driver's side. You want the pipes to exit at the same place on both sides, whichever way gives you that is correct.
|
| olddog |
07-18-2020 11:20 PM |
They may be upside down in the picture.
The pipes next to your shoes tuck in tight. I expect that is to clear the foot boxes. The other end looks to me like they would hit the foot box. Assuming some strange camera angle is not causing me to misinterpret what I am seeing.
|
| H-Rod |
07-20-2020 08:53 AM |
When I built my A&C, I received 2 of the same side header. (can`t remember which side it was right off hand)
I contacted Joe (when he running the business) and explained my dilemma.
he told me to send him the header that needed to be modified.
I did and I think I got it back within a week.
|
| 1BIG67AC |
07-26-2020 09:18 PM |
3 Attachment(s)
I just received my A&C header last week. Took forever due to the COVID pandemic, but worth the wait. I sent back the ones I bought from Shell Valley, the A&C are much better made. Here is a couple of pictures of the way they should be installed. The rear exhaust are more curved than the front. This is for more clearance from the foot box.
|
| All times are GMT -7. The time now is 09:01 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
