Club Cobra

Club Cobra (
-   Antique & Collectibles (
-   -   Cobra is on the road! (

CoyoteCobra 10-15-2020 03:36 PM

Cobra is on the road!
Finally got past all of the inspection, registration, titling, and whatever other red tape the state threw at me. I couldn't believe some of the hoops I had to jump through, but it is over. She's now street legal and I took it for a drive!

What an absolute banshee this Coyote is. It has that sweet SBF / 302HO firing order sound, but then the 32v/mod motor make it also sound sort of like an exotic at the same time. It's a cool sound in my opinion, until it starts to wind up and becomes deafening. I have to do something about these mufflers. Even at about 1/3 throttle the thing is obscenely loud above about 3 or 4000 RPM. It sounds cool when turning up and not under heavy load, but otherwise it is a bit excessive. Maybe I will get earplugs.

I'm thinking maybe this winter I will ditch these pesky slip joints for flanges, and swap the muffler to the Flow Master 13530320. Anyone have experience with these or others?

I'm also finding all the little things I need to revisit- like some of the latches and whatnot are not quite adjusted and have a slight rattle, the dash i thought was totally secure and feels secure but it has a slight rattle somewhere or another, too. I guess that will be part of the fun this winter.

AND I need to get a radio :LOL:

Anyway, thank you to you guys on this forum. I saved a lot of time and frustration seeing all of the builds and trying to avoid reinvention of the wheel as best as I could!

spdbrake 10-15-2020 03:49 PM

The Flowmasters are great and I have a set. There are a couple of threads on this site. Unfortunately they stopped making them about 2-2.5 years ago. I did some searches about a year ago for forum members and came up empty.

CoyoteCobra 10-15-2020 06:33 PM

Thanks Speedbrake. I will have to try to figure something out. I like a good bark in the exhaust, but this is just silly and I'd like to tone it down a bit. Maybe I can add some baffles to my existing pipes or something.

spdbrake 10-15-2020 07:25 PM

Quite a few folks commented they like these.

Classic Chambered Exhaust Inc. - Products

Alfa02 10-16-2020 05:32 AM


Originally Posted by spdbrake (Post 1484156)
Quite a few folks commented they like these.

Classic Chambered Exhaust Inc. - Products

I believe "HighPlainsDrifter" has them on his Dragon-Snake, Perry, you out there to comment on these? I do have his phone# & Email if need be. TommyRot.

saltshaker 10-17-2020 05:35 AM

Classic Chamber mufflers
I had them on my A&C and at 70mph you could have a conversation ...

CoyoteCobra 10-18-2020 04:34 PM

Thanks. I will have to check them out.

Blue66 10-23-2020 04:43 PM

Have to check those out to.

KDubU 10-26-2020 05:57 AM

Congrats! Any pics of your beauty?

CoyoteCobra 11-08-2020 04:44 PM

Thanks. There's a picture of it in my album, or in the thread in this sub forum about A&C's Gel Coat. It is just a few threads down from this one.

All times are GMT -7. The time now is 10:08 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting For full policy documentation refer to the following link: