|
Things&Stuff???
I just picked up my body kit this last week and though I have not really had time to look at all the parts I have already seen some stuff that I have no idea what it might be for.One box that came along with the package contains a bunch of steel scraps. I am guessing some of them are braces that will fall into place down the road but there were also several of what looked to be 1" to 1 1\4" tube cut into 1 1\2" sections. I looked through the instructions and never saw any mention of these.
I guesss my question right now would be that as I start putting the car together will some of this make some sense or will I have parts left over when I think I am done???? Thanks Guys Aaron |
Don't take this wrong, but what car are you talking about?? Who makes it? Is it just the body or is it a roller and body or is it just a whole bunch of parts you are expected to assemble into the car?
We do have some people here who have had more than one manuafacturer car, so they should be able to give you a hint. :cool: Hope this helps :3DSMILE: |
Its an A&C cobra body package...
|
Send a PM to Roscoe, he'll give ya a learnin'.
|
Re: Things&Stuff???
Quote:
It won't make sense and you'll have parts left over... Any more questions:confused: :confused: :D |
Gee Al, I think that was a little less corgil than what he expected.
True though. |
Hi Aaron i believe the tube may be for your steering column is it like2' long and expanded on one end? and as for the steel pieces side pipe brackets , brackets for your front brake lines, and possibly others, If you have any questions you can email me. have fun Neil
|
Also the small pipes are the sleves that slide in between the headers and side pipes. these seal the two units together. you also will have brackets which go from your dash to the firewall. have fun
|
I had alot of those brackets left over cause I made my own in many cases. I believe, as above, those cuts of tubing should be for the headers/pipes. How many?
Also you may want to consider using an Ididit steering column instead of screwing around with a used one. The Ididit is wired and has self cancelling signals and e-flashers. Roscoe |
Thanks guys.
I looked again last night and there are 8 of the cut pipes. Makes sense now that they are for the headers. I figured the steering wheel extention out but I will use the F River or the Ididit. Thanks Again |
| All times are GMT -7. The time now is 10:37 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: