|
Electronic Speedometer help
Where do I connnect the sending unit on a C-4 transmission for an electronic speedometer? Any help appreciated!
Jer |
It goes into the speedo drive hole. Usually a stock Ford speed sensor from a later Ford is compatible with most electronic speedos. The ones that usually come with the speedo have a threaded drive instead of the clamped in Ford design.
|
WDZ,
thanks for the reply, can I get a sensor from a Ford dealer (OR NAPA) that will fit my C-4? Jer |
You must make sure the gears mesh.
If they are in the same direction, they will not turn and the speedo gear will destroy the sending unit gear. Just my opinion. :3DSMILE: |
| All times are GMT -7. The time now is 11:25 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: