|
A&C Spindles & Rear Axle Splines
Hi Guys, Well I just put my deposit down on my A&C kit Friday. I've been toying with the idea for a couple of years, but now that my GS is pretty much done I'm itching for a new project! Anyays I'm already in the process of looking for parts. First off course are the chassis parts. I see on ebay a few pontential leads. First off they have listed a mustang II spindle set with a new 11" disc brake setup for $300. Have any of guys tried an aftermarket setup or am I better off going to a junk yard? Second do any of you know what the spline set up is for the rear axles?
Thanks! Jim |
I am located in Batavia and I have three kits there that we are building stop by or call if you have any questions 1-585-344-0408
http://www.clubcobra.com/photopost/s...ser=24144&sl=e |
Jim I picked up my Cobra in August and the rear axle was a 28 spline. I hope that helps.
Greg |
AC spindles
Hi Jim: I bought the spindles off of Ebay ad am quite happy with it. The spindle nuts i had to get from the dealer. Yes they are still available. There are sets on ebay that come with calipers too but thats up to you. I put all mustang two calipers, pads and flex lines. All OEM mustang 2. Hope this helps.
PS. If you can afford it, stay away from the junkyards. Build with brand new or remanufactered parts. So much easier, cleaner and you know that your car is brand new literally. Automan |
| All times are GMT -7. The time now is 09:19 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: