|
Front end shocks and springs
Just a few pictures of the frontend. Not sure if I need some washes in a couple of places. Take a look at the photo. In betweent the rubber shock mounts and behind the bolt heads on the a arms. **)
Ron http://www.clubcobra.com/photopost/d...um/shocks3.JPG http://www.clubcobra.com/photopost/d...um/shocks1.JPG |
wow, i would say when in doubt, throw some washers on there, they're cheap..
|
Looks Good. I added washers to the upper control arms. Make sure that both arms do not bind. That there is good movment up and down. Im going through some issues right now with the driver side front tire rubbing slightly when turning right on an offramp or going over a bump. Going to try and lossen it up alittle today.
Automan |
The upper A arm is very stiff. I loosen the end bolts but still stiff. There is no way to add grease. Is there a way to take it apart and grease?
Ron |
Maybe these will help. There may be other shots at my buildsite http://www.priveye.com/cobra.htm
http://www.priveye.com/cobra/Filter1.jpg http://www.priveye.com/cobra/Front.jpg |
Its difficult to tell right now if it right. If you torque it to the specs of mustang 2 suspension then you should be ok. Now when you have your car sitting on the ground with tires, engine and body:then when you go and lift the body by the wheel well and it stays at that position instead of dropping back down on it's own. You know that something is binding like mine is doing right now. My tire is still rubbing. I think i am going to lower my rear end by a hole or two and see what happens.
Automan |
| All times are GMT -7. The time now is 05:52 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: